background image

Lexmark™ C75

2

Clearing Jams 
Guide

Avoiding jams

The following hints can help you avoid paper jams:

Use only recommended paper. Refer to the 

Card Stock & Label Guide 

available on the 

Lexmark Web site at 

www.lexmark.com/

publications

 for more information about which 

paper provides optimum results for your printing 
environment.

Do not remove paper trays while a job is 
printing. Wait for a 

Load Tray <x>

 or 

Ready

 

message before you remove the tray.

If you need detailed information before 
purchasing large quantities of customized 
paper, refer to the 

Card Stock & Label Guide

.

Do not load wrinkled, creased, or damp paper.

Never mix media types within a tray.

Flex, fan, and straighten paper before you load 
it.

Do not overload the trays or the multipurpose 
feeder. Make sure the stack height does not 
exceed the maximum height indicated.

Push all trays firmly into the printer after loading 
them.

Make sure the guides in the trays are properly 
positioned for the size paper you have loaded.

Do not send jobs to staple, hole punch, or offset 
for transparencies, labels, or card stock.

We recommend that transparencies, labels, 
card stock, and envelopes not be sent to the 
optional mailbox or optional finisher. These 
specialty media types should be sent to the 
standard bin.

If a jam should occur, clear the entire paper 
path.

Clearing jams

Understanding jam messages

Area A

1

Release the levers on each side of the 
multipurpose feeder to lay it flat.

2

Press the pick assembly release lever, and 
remove all media and jams.

3

Return the feeder to its working position, and 
reload your paper.

Area B

1

Open the left access door until it clicks into 
place.

2

Remove all visible paper. Remove any torn 
paper from the printer.

3

Close the door.

4

Open Tray 1, and make sure the entire paper 
stack is pushed all the way down into the tray.

Message

What to do

200 Paper Jam

Clear 

Area B

 and 

Area T1

.

201 Paper Jam

Clear 

Area D

Area K

, and 

Area L

.

202 Paper Jam

Clear 

Area K

 and 

Area L

.

230 Paper Jam

Clear 

Area E

 and 

Area J

.

24<x> Paper 
Jam

Clear 

Area B, Area C

, and 

Area 

T<x>

.

250 Paper Jam

Clear 

Area A

 and 

Area D

.

27<x> Paper 
Jam

Clear 

Area M

.

Содержание C 752






Отзывы: