Barcode Printer MB 400i / MB 410i
Maintenance
2006-08-22
27
8 Maintenance
The device must be cleaned on a daily basis.
DANGER!
Danger to life caused by electric current!
Switch off the device and disconnect the power
plug before performing any cleaning.
Remove the battery pack from the device.
Cleaning
Fig. 33: Opening the printer cover
1.
Slide the lever in the direction of the arrow to open the printer
cover.
NOTE!
When in peeling printing mode, first slide the
peeling unit to the continuous printing mode
position.
Fig. 34: Peeling roller
Fig. 35: Cleaning the platen
2.
Clean the peeling roller (1) and the platen (2) with a cloth
dipped in alcohol.
NOTE!
Do not use thinner, benzene or kerosene.
