5
2. Loading the Battery
When using the unit for the first time or when the low battery mark lights up,
replace the
battery with a new one as described below.
(1) Open the battery lid.
(2) Check both polarities (+/-) of the battery snap
fasteners and a 9V battery 6F22 (006P).
Insert the battery in place.
(3) Close the battery lid so that it clicks.
Cautions
Replace the battery immediately when the low-battery mark on the LCD lights.
Measurements while the low-battery mark is lit may affect the accuracy, possibly resulting in
malfunction of the thermometer.
Do not dispose of the used battery in a fire.
The battery is a factory set. The battery was used for monitoring and its battery life may be
shortened
3. Putting Vinyl Cover on Thermometer
It is recommended to use the thermometer putting the vinyl cover on top and grip of the unit. The
cover will help absorb shock in case the unit is dropped accidentally, and protect the unit from
becoming dirty during use. The thermometer is shipped being put the cover on.
1) Hold the opening of the cover wide when inserting the unit.
2) Fix the snap fastener (button) on the cover to secure the unit.
NB. * When removing the cover, take off the lens cap first from the hand strap. Be careful not to
lose it.
NB.
*
When using the cover, static electricity may be charged inside the cover, and the indicated
value may become unstable. In that case, remove the cover and use.