2
- Do not use this unit in an environment where electrical noise is generated. Doing so may result in
unstable display or larger errors. Also, do not bring the unit close to a charged object.
- Never allow the unit to become wet, as it is not waterproof.
- If this unit is not going to be used for a long time, always remove the battery from the unit.
Otherwise, the battery may leak fluid, resulting in failure.
- Do not dispose of the used battery in a fire.
-
Keep the battery out of the reach of children. If you have swallowed the battery accidentally, consult
a doctor immediately.
- For environmental conservation purposes, dispose of the used battery in compliance with local
rules and regulations.
- Do not wash or wipe this unit with alcohol, thinner, or other organic solvents. If the unit becomes
dirty, wipe it with a tightly-wrung gauze or the like that has been dipped in warm water with neutral
detergent.
- Do not wipe the temperature measurement section (infrared lens) directly with gauze. For details,
refer to "Maintenance".
- Glass does not transmit wavelengths used by this thermometer. Therefore, when an object is
placed beyond glass, this unit detects the temperature of the glass and displays its temperature
reading.
- If the ambient temperature fluctuates excessively, the measurement accuracy may be affected.
Wait for a while for the unit to properly adapt to the ambient temperature. For a change of
temperature of 10ºC or more, wait for at least 30 minutes before measurement.
- For repair or calibration, contact the dealer from which the unit was purchased, or our service
network.
Overview
The SK-8920 is a non-contact type infrared thermometer, which detects the infrared energy emitted
from an object and converts it into a temperature reading. The product can measure the temperature
of the surface instantly without touching the object.