Satel XD-2, Руководство пользователя

Страница: 10 / 12

8 XD-2 SATEL
8. Close the detector enclosure.
9. For the magnetic contact, install the magnet (Fig. 5), taking into account the maximum
permissible distance from the magnetic sensor (Fig. 6 and 7). The shown distance applies
to the magnet located at the height of the sensor. Location of the sensor in the enclosure
is shown in Fig. 8.
10. Power up the detector.
11. Test the detector (see:
“Detector test”).
12. For the water flood detector, when the test is done, install the FPX-1 probe as shown in
Fig. 9. Install the probe just above the floor.