Satel VIVER Скачать руководство пользователя страница 7

SATEL VIVER 

 

Retry every – the interval between consecutive attempts to establish modem 

connection with the monitoring station (0–240 minutes; for 0, the module will make 
a new attempt to connect immediately after the previous connection has failed). 

Note! When the VIVER module is working in the “Ethernet plus modem” configuration and 

the communication with the network is lost, the device will continue communication 
through the modem. However, when communication with the network is restored, the 
modem transmission will be stopped and the remaining data will be sent over the 
network. This gives greater certainty that the event message will be delivered. 

6. Technical data 

Supply voltage ................................................................................................... 12 V DC ±15% 

Current consumption, stand-by......................................................................................160 mA 

Current consumption, max.............................................................................................200 mA 

Working temperature range .................................................................................... +5…+40 °C 

Electronics board dimensions ................................................................................. 69x139 mm 

Weight............................................................................................................................... 125 g 

 

 

 

 

 

Содержание VIVER









Отзывы: