SATEL
SZW-02
2
8. Connect the power wires to the +12V and GND terminals.
9. Close the enclosure.
10. Turn the power on.
Fig. 2. Example of connecting the actuator to the code lock.
2.1 Terminals
GND
– common ground
C
– relay output
+12V
– power input
TMP
– tamper output (NC)
ALM
– output indicating that invalid code has been entered three times (OC type output –
shorted to common ground when active)
+LD
,
-LD
– control input for the SYSTEM LED
3 Using
3.1 LED indicators
LED
Color
Description
SYSTEM
yellow
function determined by the installer
ON
red
relay output turned on
OFF
green
relay output turned off
3.2 Code
In order to be able to use the lock, enter the code on the numerical keypad.
By factory default, the following codes are programmed in the code lock:
service code: 12345
user code: 1234
Change the factory default codes before you start using the code lock.
Do not make your code available to other people.
