SATEL
SP-6500 • SD-6000
5
10 minutes.
15 minutes.
MELODY 1
MELODY 0
The two pairs of pins allow you to select the tone type.
Two sound frequencies (1450 Hz/2000
second.
Hz) alternating within 1
Sound with rising frequency (from 1450 Hz to 2000 Hz) within 1
second.
Sound with smoothly rising and falling frequency (1450 Hz –
2000 Hz – 1450 Hz) within 1 second.
Sound with falling frequency (from 2000 Hz to 1450 Hz) within
second.
1
POLARITY A
Allow you to set polarity for the STA input.
Acoustic signaling
oved (inactive status:
+12 V DC voltage
is triggered w
voltage is rem
is applied to the input).
hen +12 V DC
Acoustic signaling is triggered when 0 V voltage is removed (inactive status: 0 V
voltage is applied to the input).
POLARITY O
Allow you to set polarity for the STO input.
Optical signaling i
ved (inactive status:
+12 V DC voltage
s triggered wh
oltage is remo
is applied to the input).
en +12 V DC v
Optical signaling is triggered when 0 V voltage is removed (inactive status: 0 V
voltage is applied to the input).
POLARITY LED
Allow you to set polarity for the LED input.
The LEDs used a
ge is removed (inactive
status: +12 V DC
s indicators a
2 V DC volta
voltage is applied to the input).
re active when +1
The LEDs used as indicators are active when 0 V voltage is removed (inactive
status: 0 V voltage is applied to the input).
inges
sure cover and base are connected with hinges. The hinges are of the detachable
h enables the cover to be fully removed. The moving parts of hinges can be
H
The enclo
type, whic
mounted in any position, thus allowing you to select whether the cover is to open downward,
to the left or to the right. According to the standard factory execution, the cover opens
downward. How to relocate the moving parts of hinges – see section M
OUNTING THE HINGES IN
OTHER THAN STANDARD FACTORY POSITION
.
