Satel SATELLINE-M3-R4 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 60

background image

SATELLINE-M3-TR3,

–

TR4 and -R4

Integration Guide, Version 3.4

38

9.15

Pacific Crest and TRIMTALK compatibility

This product supports additional to the original SATELLINE-3AS

(“SATEL 3AS”)

data transfer

also:

•

Pacific Crest FST compatible data transfer over the air, if the opponent Pacific Crest
modems operate in the transparent mode. See list below

•

TRIMTALK® 450s compatible data transfer over the air

•

SOUTH GDL radios (trademark of SOUTH Surveying & Mapping Instrument Co., Ltd).

o

Pacific Crest XDL/ADL radios in the SOUTH radio compatible mode

o

Only 25 kHz channel width on 400 MHz frequency band is supported.

This product provides the following radio compatibility options:

•

SATEL

Original

“SATEL 3AS”

(default) 4FSK data transfer mode (option 0)

SATEL-8FSK-1 (option 20) 8-FSK/FEC OFF (TR/R4 only)
SATEL-8FSK-2 (option 21) 8-FSK/FEC ON (TR/R4 only)
SATEL-16FSK-1 (option 22) 16-FSK/FEC ON (TR/R4 only)

•

PacCrest-4FSK

Transparent mode/FEC ON/Scrambling ON (option 1)
Transparent mode/FEC OFF/Scrambling ON (option 23)
Transparent mode/FEC OFF/Scrambling OFF (option 26)
Transparent mode/FEC ON/Scrambling OFF (option 28)

•

PacCrest-GMSK

Transparent mode/FEC ON/Scrambling ON (option 2)
Transparent mode/FEC OFF/Scrambling ON (option 24)
Transparent mode/FEC OFF/Scrambling OFF (option 27)
Transparent mode/FEC ON/Scrambling OFF (option 29)

•

TrimTalk450s(P)

Trimtalk450s GMSK Rx fitted to PacCrest transmitters (option 3)

•

TrimTalk450s(T)

Trimtalk450s GMSK Rx fitted to Trimble transmitters (option 4)

•

PacCrest-FST

Pacific Crest-FST/FEC ON/Scrambling ON (option 5)
Pacific Crest-FST/FEC OFF/Scrambling ON (option 25)

•

SOUTH

SOUTH Surveying & Mapping Instrument Co. Ltd (option 8)

Compatibility configuration can be done by using SL commands.

“SL@S=

x

” command selects

the compatibility mode

, “x” equals the corresponding compatibility option. Example: “SL@S=

0

”

sets the original

“SATEL 3AS” compatibility mode

(option 0). The modem respo

nds with “OK”

message if the requested mode is supported or “ERROR” if the mode is not allowed.

Notes:

Supported compatibility options may vary depending on the model and factory configuration.

«
...
37
38
39
40
41
...
»

Содержание SATELLINE-M3-R4





























































Отзывы:

Нет отзывов

Похожие инструкции для SATELLINE-M3-R4

Бренд: Panasonic Страницы: 24

Бренд: Hammarlund Страницы: 38

Бренд: Hammarlund Страницы: 22

Бренд: Hammarlund Страницы: 87

Бренд: Harman Страницы: 30

Бренд: Laird Страницы: 13

Бренд: Laird Страницы: 32

Бренд: Yamaha Страницы: 75

Бренд: Datawell BV Страницы: 49

Бренд: Sencore Страницы: 25

Бренд: Northern Страницы: 4

Бренд: RF Limited Страницы: 4

Бренд: ASCOM Страницы: 22

Бренд: HiTV Страницы: 28

Бренд: MKS Страницы: 55

Бренд: M-system Страницы: 3

Бренд: FrontRow Страницы: 32

Бренд: Perstel Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды