SATELLINE-EASy / SATELLINE-EASy 869
User Guide, Version 3.0
46
10
LCD & PUSH BUTTONS
SATELLINE-EASy (the models equipped with a display) include an LCD (Liquid Crystal Display)
and four push buttons that indicate the status of the radio modem and enable easy modification
of the settings without the need for an external terminal. This feature is especially handy on the
field conditions.
10.1
LCD after power-up
The picture below shows the outlook of the LCD after the power-up in its top level view.
The indicator on the upper left corner has two functions:
•
Antenna symbol followed by Received Signal Strength (RSSI) in dBm units. RSSI will be
shown for about 7 seconds after the last message has been received.
•
“n” symbol followed by the noise level whenever RSSI is not shown i.e. there are no
messages from any other compatible radio modem detected.
The indicator on the upper right corner indicates the supply voltage / battery level of the radio
modem in Volts.
The two lines in the middle revolve automatically every 5 seconds displaying the basic settings as
illustrated below.
ö
- RSSI indicator
n
- Noise level indicator
Voltage meter
