manualshive.com logo in svg

Satel SATELLINE-EASy, Руководство пользователя

Поделиться
Скачать
Satel SATELLINE-EASy Скачать руководство пользователя страница 38

 

                                                                                         

SATELLINE-EASy / SATELLINE-EASy 869 

User Guide, Version 3.0 

 

38 

to when using SL commands “SL&+=” and “SL&-=”. In most 
cases the setting can be ignored. 
The value must be in range of 403…473 MHz. 
Default value: 438.000 MHz 

Channel Spacing (Width)  12.5, 20 or 25 kHz 

Channel spacing defines the frequency difference between 
adjacent radio channels. In the context of SATELLINE-EASy 

modems it defines also the width of the radio channel. 
Default value: 12.5 kHz 

Tx Power 

Transmitter output power 

EASy supports 100, 200, 500 or 1000 mW 
EASy 869 supports 10, 20, 50, 100, 200, 500 or 1000 mW 
Default values: 1000 mW (EASy) / 500 mW (EASy 869) 

Signal threshold 

RSSI Signal threshold defines the minimum power level (dBm) of 
the radio signal to be received. Any transmissions below the 
threshold level are ignored. Note that the greater the absolute 
value is the weaker is the signal threshold level (-110 dBm is 
weaker than -90 dBm). Value range is -80 … -118 dBm. 
Default value: -115 dBm 

Channel list 

Selects whether the list of predefined radio channels is used for 
the configuration of radio parameters. 
Default value: Channel list OFF 

FCS (Free Channel Scan)  FCS parameters and settings are described in separate technical 

documentation available from the dealers or SATEL. 
FCS is not to be mixed with the Channel list and its functions. 
Default value: Free Channel Scan mode OFF 

TX Start Delay 

Defines the extra time (0...65000 ms) the radio modem waits 
before starting to transmit. Data is buffered during the delay. 
Default value: 0 ms (=no delay) 

Radio Compatibility 

Defines the radio protocol 
Options are SATELLINE-3AS, PacCrest-4FSK, PacCrest-GMSK 
TrimTalk450s (P), TrimTalk450s (T), PacCrest-FST 

Default value: SATELLINE-3AS 

Call Sign 

Call sign means that the modem transmits its Call sign ID 

periodically using Morse keying. 
Call sign is configured using three settings: 
a) Call sign mode sets Call sign operation ON/OFF. 
b) Call sign ID defines Morse code to be transmitted, max. 
sixteen characters, capital letters and numbers are allowed (lower 
case letters are converted automatically to uppercase letters). 
If Call sign mode is not used (OFF) you can enter e.g. 
"CALLSIGN" for the Call sign ID. 
c) Call sign timer is the interval (1...30 min) between Call sign 
transmissions. 

One Call sign transmission may take several seconds to transmit, 
depending on the Call sign ID. 
Default value: Call sign mode OFF 

Содержание SATELLINE-EASy




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды