6 INT-R
SATEL
Access if armed
[Code* in arm] – this option is available when the N
O AUTO
-
DISARM
option is
enabled. If both options are enabled, presenting the card to / touching the reader with
DALLAS chip will make it possible to activate the relay (open the door) even when the
partition is armed (partition will not been disarmed).
Fig. 3. Setting parameters and options for the expander identified as CA-64 SR in
the D
LOAD
X program.
Authorization control
[Unauth. event] – if this option is enabled, opening the door without
reading in the card / chip will result in appropriate information being written into the control
panel event log. This event can also be signaled on the 93. U
NAUTHORIZED ACCESS
type
output.
Alarm on unauth. access
[Unauth. alarm] – this option is available when the A
UTHORIZATION
CONTROL
is enabled. If both options are enabled and the partition to which the expander
belongs is armed, opening the door without reading in the card / chip will trigger alarm.
Master users / Users
– indicate the administrators (master users) and users who will be
authorized to use the readers connected to the expander.
Reader control (Reader A)
[Reader A] /
Reader control (Reader B)
[Reader B] – options
available in the expander identified as CA-64 SR. The expander can control the reader
presence. Lack of the reader will generate a trouble (see also the R
EADER TAMPER ALARM
option). The reader presence control can be effected if the reader is provided with a
presence control circuit (the white wire in proximity card readers manufactured by SATEL).
