22
User manual
GSM LT-2
Where the number of digits is not precisely defined (e.g. a telephone number), such
a parameter is described with the following symbol:
[?...]
.
The numbers of telephones/PAGER stations may contain special characters:
#
,
*
,
+
. In order
to program such a character from the telephone keypad, call the programming function and
press successively the two keys:
[*][1] =
#
[*][*] =
*
[*][0] =
+
Entering a correct command is signaled in the handset by three short beeps (SSS), while
commands which are incomprehensible or have an incorrect number of characters are
signaled by two long beeps (LL).
The function completed, the module returns to the programming mode. If you hang up,
the module will quit the programming mode and return to the normal operating mode.
12.2.3 Function list
[0][1][*][*][?][?][?][?][#]
– SIM card
PIN
code
(4 digits). The code saved in module memory
does not change the code stored on the SIM card. The [0][1][*][*][#] sequence deletes the
PIN code from module memory.
[0][2][*][*][?...][#]
–
SMS
center number
– the telephone number necessary for sending text
messages. The number of its digits must be within the range of 1...16. The entered
number depends on the GSM network, where the telephone is activated.
It must be
preceded by the country code
suitable for the operated network.
The [0][2][*][*][#] sequence deletes the previously saved SMS center number.
[0][3][*][*][?][?][?][?][?][?][#]
–
SMS password
(6 characters) required for a remote
change of the modem format
. Sending to the module of an SMS containing the
[?][?][?][?][?][?]=NN sequence will change the modem operating format available in the
GSM telephone. The two NN digits define the format as described in the function 08. Using
DTMF signals it is possible to program a password comprised of digits only (0...9), while
using the DLOAD10 program you can program a password comprised of both letters and
digits. The [0][3][*][*][#] sequence deletes the previously programmed password.
[0][4][*][*][?][?][?][?][?][?][#]
–
SMS password
(6 characters) starting connection with
DLOAD program. The function applies to interaction between the module and the
INTEGRA/CA-64 alarm control panel. Sending to the module of an SMS containing the
programmed password makes the control panel call back to the number saved in its
memory as the "DLOADX telephone"/"DLOAD64 telephone" in order to start the
downloading function. If the control panel is to call back to another number, the number
should be put into the SMS content as follows: [?][?][?][?][?][?]=dddd. (password, equality
sign, telephone number, dot). If the module receives an SMS message initiating
connection with the INTEGRA control panel and the access from DLOADX program is
blocked, the module will send a SMS message stating that "Remote access from DloadX
program is not granted" to the number preprogrammed with function 26.
Using DTMF signals it is possible to program a password comprised of digits only (0...9),
while using the DLOAD10 program you can program a password comprised of both letters
and digits. The [0][4][*][*][#] sequence deletes the previously programmed password.
[0][5][*][*][?][?][?][?][?][?][#]
–
SMS password
(6 characters) starting connection with
GUARD program. The function applies to interaction between the module and the
INTEGRA/CA-64 alarm control panel. Sending to the module of an SMS containing the
programmed password makes the control panel call back to the number saved in its
memory as the "GuardX telephone"/"Guard64 telephone" in order to start the remote
communication with the GUARDX/GUARD64 program. If the control panel is to call back
to another number, the number should be put into the SMS content as follows:
