2 CA-64
SM
SATEL
6 - cables for PIN5 type plug for connecting the expander to the appropriate socket on the
control panel electronics board.
7 - headset socket to enable audio monitoring of the recorded messages.
8 - headset socket to enable telephone line listen-in functionality.
Note:
When interacting with the INTERA 128-WRL control panel, only the signals received
by the panel can be listen in.
9 - microphone.
LED status
Message
number
M3 M2 M1 M0
0
– LED OFF
1
– LED ON
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Table 1. The way of message number presentation.
1.1 DIP-switches
The DIP-switches from 1 to 5 are to be used for address setting. The address must be
different from that of the other modules connected to the communication bus of alarm control
panel. In order to determine the expander address, add up the values set on individual
switches as shown in Table 2.
DIP-switch number
1 2 3 4 5
Numerical value
(for switch in ON position)
1 2 4 8 16
Table 2.
The DIP-switch 8 is used to disable/enable the message recording:
−
switch in ON position – message recording available;
−
switch in OFF position – message recording not available.
