Satel ACTIVA-2, Руководство пользователя

Страница: 8 / 8

8 ACTIVA SATEL
Note: If the beam is interrupted for a shorter time than the programmed sensitivity, the
program will indicate this by changing the color of the given beam to:
– light green – the beam was interrupted for a shorter time than half the value defined
for sensitivity,
– yellow – the beam was interrupted for a longer time than half the value defined for
sensitivity.
D Beam is not interrupted (continuous line, green color),
E Beam is disabled (continuous line, gray color),
F Beam is bypassed (if the number of interruptions specified in the Autobypass parameter is
reached during the Counting time ). The beam will be unbypassed when:
– the LED input status is changed,
– the bypass memory is reset.
G Transmitter. Red color (as in Figure 11) means that the transmitter tamper input has been
violated,
H Tamper switch indicator. It can indicate two states:
– Output TMP OK,
– Tamper (as in Figure 11).
I Power supply indicator – it shows the current voltage level across the barrier terminals,
J Alarm output indicator. It can indicate two states:
– Output NC OK (as in Figure 11),
– Alarm.
5. Specifications
ACTIVA-2 ACTIVA-3 ACTIVA-4 ACTIVA-5 ACTIVA-6 ACTIVA-7 ACTIVA-8
Nominal power
supply voltage ±15%
12 V DC
Current consumption,
standby
40 mA 40 mA 40 mA 40 mA 40 mA 45 mA 45 mA
Current consumption,
maximum
45 mA 45 mA 45 mA 50 mA 50 mA 50 mA 50 mA
Operating
temperature range
-25…+55 ° C
Range (adjustable) 10/20 m
Emitted wavelength 950 nm
Hight 52 cm 78 cm 105 cm 130 cm 158 cm 184 cm 210 cm
Panel depth 23.5 mm
Panel width 21.5 mm
Distance between
first beam and
laminate edge with
terminal block -
barrier lower part
70 mm
Distance between
beams
250 mm
Distance between
last beam and
laminate end –
barrier upper part
45 mm
Weight 500 g 750 g 1050 g 1250 g 1450 g 1750 g 2000 g
SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298
Gdańsk • POLAND
tel. + 48 58 320 94 00
info@satel.pl
www.satel.eu