Satel ACTIVA-2, Руководство пользователя

Страница: 7 / 8

SATEL ACTIVA 7
Maximum time of all beams interruption – the amount of time (counted in minutes, within the
0–255 range) after expiry of which all beams interruption will be interpreted as device tamper
(0 – no response).
Figure 11. Window of the ACTIVA program.
3 -
Alarm – parameter which specifies whether an alarm will be already triggered after interruption
of one, or at least two beams.
4 - Communication status bar – the following information is displayed on the bar:
– model of the connected device (ACTIVA-4),
– firmware version and build date of the connected barrier.
5 - Button for reading data from barrier memory.
6 - Button for writing data to barrier memory.
7 - Button for erasing the memory of bypasses.
8 - Diagnostic window. The window displays the following information:
A Receiver. In the ACTIVA program, its color can be as follows:
– white – normal running mode of the device,
– red – tamper of the receiver,
– blue – synchronization of the transmitter and the receiver.
B LED – indicates interruption of the beams (if jumper is placed over the LED pins on the
receiver electronics board),
C Beam is interrupted (broken line, red color). Interruption of the beam path lasted longer than
the time programmed with the
Beam sensitivity parameter.