2
LIMITED WARRANTY
The manufacturer offers the customer a 24-month functional warranty on
the instrument for faulty workmanship or parts from date of dispatch from
the distributor. In all cases, this warranty is valid for 36 months from the
date of production. This warranty is on a return to factory basis.
The manufacturer does not accept liability for any damage caused by
instrument malfunction. The manufacturer accepts no responsibility for
the suitability of the instrument to the application for which it was
purchased.
Failure to install, setup or operate the instrument according to the
instructions herein will void the warranty.
Your instrument may be opened only by a duly authorized representative
of the manufacturer. The unit should only be opened in a fully anti-static
environment. Failure to do so may damage the electronic components
and will void the warranty.
NOTE
The greatest care has been taken to manufacture your instrument.
However, these instructions do not cover all possible contingencies that
may arise during installation, operation or maintenance, and not all
details and variations of this equipment are covered by these
instructions.
For additional information regarding installation, operation or
maintenance of this instrument, contact the manufacturer or your local
representative or distributor.
Table of Contents
1
Mechanical Installation _____________________ 3
1.1
Standard Cutouts (round or square) __________________ 3
1.2
Special Cutouts ___________________________________ 4
2
Electrical Installation _______________________ 5
3
Setup on the RDM _________________________ 6
3.1
Instrument Setup Menus____________________________ 6
3.2
Performing RDM Communication Adjustment _________ 6
3.3
RDM Setup Menu __________________________________ 6
4
Status Information Menu____________________ 8
5
Troubleshooting: Fault Condition Display _____ 9
6 Communications __________________________ 9
BG0324 Rev. A2
