Chapter 5 Setting Up the ETC II
Configuring Dial-Up Connections
ETC II Network Communicator
39
@
Wait for silence: the modem will wait for at least
5 seconds of silence before continuing with the
next dial string parameter.
( )
Ignored: may be used to format the dial string.
-
Ignored: may be used to format the dial string.
<space> Ignored: may be used to format the dial string.
Example: 9W02, 5411000
Using PAS
Select Communications Setup from the Meter Setup menu,
and then click on the Dial-Up Networking Setup tab.
The following table lists available connection options.
Parameter
Options
Default
Description
Connection Options
IP Address
192.168.10.203
The IP address on the dial-in
modem PPP network. Not used in
a GPRS network.
Network Subnet
Mask
255.255.0.0
The PPP/GPRS network subnet
mask
Network Default
Gateway
192.168.10.204
The PPP network default gateway.
Not used in a GPRS network.
Redial Attempts
0-1000,
0 = forever
0
The number of dial attempts to
connect to a remote modem if a
connection was unsuccessful.
Connection Timeout 0-9999 sec 120
The modem cancels a call if not
connected within the connection
timeout time.
Time Between
Redial Attempts
0-9999 sec 60
A time delay between redials.
