SatelliteDish.com (954) 941-8883
Page 3 of 7
Control and Harness
APPLY THE HEATER PADS TO THE REFLECTOR PANELS
1. Properly support the reflector panel so that no distortion results from heater pad attachment. Verify
differences in reflector panels have been accounted for.
2. The surface temperature of the panel should be above 50 degrees Fahrenheit, 10
degrees Celsius for proper adhesion of the heater pads.
3. Thoroughly clean the rear of the reflector panels with Windex and dry thoroughly.
4. Test fit the pads by laying all of them on the back of the reflector. See the Heater Pad Placement and Lead
Connections drawing for the proper locations.
5. Remove the backing paper from the heater pads one at a time and carefully apply to the cleaned reflector.
Smooth each pad as it is placed on the reflector. The adhesive is pressure sensitive so be sure to apply
pressure and rub the heater pad as it is smoothed to activate the adhesive and adhere properly.
