Satco Products HID Lamps, Каталог

Страница: 16 / 16

HID Lamps Notes
HID lamps
120
Measured vs Perceived Light
Levels of HID Lamp
Studies on nighttime visibility demonstrate experimentally
that the human eyes is sensitive to different colors of
light based on various lighting levels, thus impacting
the “true” or “effective” lumen output of a lamp. Recent
research shows that the color of a light source has a
significant effect on nighttime visibility, which is important
since most road accidents happen at night. It is also well
known that the eye responds to color differently based
on the amount of light available.
While lumens are the standard measurement of light
output, light is actually defined as energy evaluated by
the eye. Standard lumen measurements are based on
the light output response of a person only during high
light levels (photopic light), typical of daylight and interior
lighting. Light meters measure photopic light as seen
by the central region of the eye. When light levels are
very low, like starlight, the viewing conditions are referred
to as scotopic. Under these conditions, the eyes visual
response changes dramatically. Sensitivity to yellow and
red light is greatly reduced, while response to blue light is
vastly increased. Since lamp lumen measurements have
been determined using photopic measurements, the
lumen values do not accurately measure the effective
light output as perceived by the human eye.
Since the value of a lamp’s lumen output is different
when considering the shifting color sensitivity of the eye
at low levels, the effective lumens will be different from
the measurable photopic lumens. As light diminishes
from photopic to scotopic conditions, the effective
lumens of yellow sodium light sources are reduced, and
the effective lumens of the whiter metal halide sources
increase. This effect is most dramatic for low pressure
sodium (SOX) lamps. Almost all energy output from SOX
lamps is yellow, resulting in an artificially high photopic
lumen output, yet a very low perceived light output in
low light level applications.
Typical metal halide lamps have strong light output
in the blue, green and yellow areas, resulting in high
lumen output at all light levels. The blue light output
of metal halide is in the high sensitivity region of the
eye for low light levels. This means that the effective
lumens actually increase for a metal halide lamp as
the light level reduces and the eye shifts to a blue/
green peak sensitivity. The ability to detect fine contrast
is also significantly better under metal halide sources
than sodium, making it a more effective light source in
warehouse and retail applications. Studies have shown
that metal halide lighting, in some circumstances, can
be up to six times as effective as HPS. This can make a
difference in peripheral viewing and dark areas where
hidden hazards may be present.
Metal Halide 2005 NEC Changes
The 2005 update to the National Electrical Code (NEC)
includes two changes that affect the manufacture
and installation of metal halide luminaires. Both
changes address methods for preventing risk when
metal halide lamps are used.
The purpose of these changes is to prevent possible
injury and property damage. Metal halide lamps can
explode, shooting hot glass out of the luminaire, or
fixture. In an open luminaire - one that does not have
a lens - this can result in a fire, personal injury, and
property damage. Although violent failure is a rare
occurrence (about three incidents per year), the NEC
has included these changes to help eliminate the
hazard.
In sports facilities, particularly in schools, athletic
activity can break the outer jacket of a metal
halide lamp used in an open luminaire. When this
happens, the arc tube can continue to operate with a
damaged or missing outer jacket. This leads to reports
of UV over-exposure, including sunburn and a burning
sensation around the eyes. The NEC change requires
complete lamp enclosure in these facilities, which
will provide mechanical protection to reduce the
possibility of damage to the outer lamp jacket.
NEC changes for open luminaires
The NEC change regarding open luminaires is the
new section 410.73(F)(5) that states, “Metal Halide
Lamp Containment. Luminaires (fixtures) that use a
metal halide lamp other than a thick-glass parabolic
reflector lamp (PAR) shall be provided with a
containment barrier that encloses the lamp, or shall
be provided with a physical means that only allows
the use of a lamp that is Type O.”
Therefore, to meet the 2005 NEC requirements,
luminaires that use metal halide lamps must either:
• Be enclosed to provide a containment barrier.
• Use a special lampholder that will only accept an
ANSI Type O rated metal halide lamp.
NEC 2005 changes for sporting facilities
The NEC change regarding open luminaires is the
new section 410.4(E) that states, “Luminaires (fixtures)
subject to physical damage, using a mercury vapor or
metal halide lamp, installed in playing and spectator
seating areas of indoor sports, mixed-use, or all-
purpose facilities shall be of the type that protects
the lamp with a glass or plastic lens. Such luminaires
(fixtures) shall be permitted to have an additional
guard.”