Important :
Fixed Installations
Whatever the type of pump, the motor must always be protected by a circuit breaker situated
on the electricity board, set at the maximum level corresponding to the motor’s power.
It is further recommended that the circuit breaker should include a thermal relay of minimum
power, to avoid the machine starting up again unexpectedly after a short stop for that reason.
A Stop/Start button must be installed close to the delivered unit in a fireproof casing.
5.
Implementation
When the hydraulic and electric connections have been made, it is possible to start to start the
counting unit observing the following rules:
-
evacuate the unit
-
start with a small flow
Attention :
Never lose sight of the dangers in manipulating what is essentially an inflammable product,
and observe the safety rules and regulations for using such apparatus. In particular, smoking is
forbidden; keep an extinguisher close by etc…
• Earth the lorry, boat or plane.
• Turn the indicator to zero by turning its handle. If the machine has a ticket printer,
then turn to zero after inserting the ticket into the slot, the side with writing on facing
downwards, and by turning the handle as far as it will go, the ticket will be punched.
• For those units with an electronic reader, RUBIS, EQUALIS L or EMR 3 refer to the
instructions for use.
• Open the distribution tap.
Using a tanker:
• Unroll the distribution hose, attach the nozzle and open it, turn to zero and if
appropriate punch the ticket.
• In the case of EMR3 start the distribution on the counter, fully open the valves and
open the tank.
• Start the pump.
• With the electronic counter RUBIS or EQUALIS L, the opening of the valves and
the starting of the pump is automatic.
15/07/09 10/11 U509001-e Revision : 01