Edition du 25/02/09
/18
U508219-e Revision : 2
10
6. Check print wheel end play for 0.020 to
0.025 inches.
7. Turn the printer so the printing arm faces
you. Check the springs to see that they are
properly anchored.
8. Check roller on the printing arm for proper
alignment on cam.
9. Examine stop pawl for proper assembly.
10. Turn the printer so the back faces you. Be
sure the ticket stop screw is secure.
11. Check the tray support rods to be certain
they are free and secured in place by four
clips.
12. Turn the printer so the knob faces you. Be
sure the springs are properly anchored (omit
for Accumulative Printer).
13. Examine the E-ring retainers and pins to
be certain that they are properly seated and
tight.
14. Examine the three reset gears for damage
or wear. Replace as required.
Figure 11. Parts Identification
Printing Arm
Cushion
Rebound
Plate
Printing Arm
Groove Pin
Reset
Gear
Identifier
Wheels
Printing
Wheel End
Play
Sales
Number
Wheels
Quantity
Wheels
Seal
Pin
No-Back
(One-Turn)
Pawl
