SATA filter 100 prep, Руководство по эксплуатации

Страница: 65 / 261

65
EN
Operating Manual SATA filter 100 / 101 / 103 prep
Operating Manual SATA filter 100 / 101 / 103 prep
Note!
• Mount compressed air connector G ¼" (interior thread) or matching
SATA-quick-action coupling G ¼ " (interior thread) (item no. 13599,
not included in delivery) on the ball tap [1-6] .
• For regular filter maintenance, replace and activate the SATA filter
timer of the respective filter stage (sintered filters and fine filters every
6 months, activated carbon filters every 3 months).
1. Connect suitable compressed air hose.
2. Turn the pressure adjustment knob [1-5] in counterclockwise direction
to the maximum; state = closed
3. Fully open ball valve [1-6]
4. Turn pressure adjustment knob [1-5] to the right until required pres -
sure is displayed on the pressure gauge [1-3] .
5. Control pressure when operating the spray gun (trigger fully pulled)
and re-adjust, if necessary.
9. Function
9.1. Filter stage [A]:
The first filter stage separates particles > 5 µm as well as condensed wa -
ter and oil. The sintered filter
(Art. No. 22160)
is integrated in the filter.
Note!
Sintered filter:
• Fineness 5µm
• Surface 100 cm²
The automatic condensate drain valve
[1-9]
only works properly when the
filter is vertically mounted. If a certain condensate filling level is reached
inside the filter housing [1-12] , the condensate drain valve opens auto -
matically draining the condensate through the condensate drain hose
[1-
10] into the collection container (not included in delivery) until just a small
residual quantity remains.
9.2. Filter stage [B]:
The fine filter cartridge
(Art. No. 148270)
of the second filter stage sepa -
rates smallest particles.
BAL-SATA filter 100-101-103 prep.indb 65 12.11.2015 15:18:20