- 3 -
CHECK THERMOSTAT OPERATION
Switch on the thermostat
Fan operation
1.
Push fan button, display will show
and Auto separately means fan rotate in HI
MED LOW or AUTO speed.
2.
If you select AUTO speed, fan operation will
change speed according to the difference
between the room temperature and set
temperature. If room temperature is 3
℃
higher than setting temperature in cooling
or3
lower than setting temperature in
℃
Heating. Fan will run in HI speed. If room
temperature is 2
℃
- 3
higher than setting
℃
temperature in cooling or 2
℃
-3
lower than
℃
setting temperature in Heating. Fan will run
in Medium speed. If room temperature is
0
℃
-2
higher than setting temperature in
℃
cooling or 0
℃
-2
lower than setting
℃
temperature in Heating. Fan will run in Low
speed.
Heat system operation
1.
Press system switch to heat mode ( )
2. Press
“
▲
” to adjust the thermostat setting
above the room temperature. The heating
system should start to operate.
3. Press
“
▼
“ to adjust the thermostat setting
below the room temperature. The heating
system should stop operating.
Cooling system operation
1.
Press system switch to cool mode ( )
2. Press
“
▼
“ to adjust thermostat setting below
room temperature. The cooling system
should start to operate.
3.
Press “
▲
” to adjust temperature setting
above room temperature. The cooling
system should stop operating
Sleep operation
Push sleep operation button
○
4
,
appears indicate during the following 8 hours, the thermostat will
control heating or cooling according to following curve. Push sleep operation button again,
disappears
indicate the sleep operation feature is canceled.
Applications
System switch on cool mode: To achieve better sleep, 1 hour after sleeping mode setting, set point
temperature will raise 1
℃
automatically, and 2 hours later, setting point temperature will raise 2
℃
and keep on
with this temperature until timer off, which is 8 hours. After timer off, set point will be restored to formal setting
automatically.
System switch on heat mode: To achieve better sleep, 0.5 hour after sleeping mode setting, set point
temperature will decrease 1
℃
automatically, and1 hour later, setting point temperature will decrease 2
℃
,
2 hours later, setting will decrease 3
℃
and keep on with this temperature until timer off, which is 8 hours.
After timer off, set point will be restored to formal setting automatically.
t im e
T e m p
C o o lin g M o d e
s e t t e m p . r a is e a u t o m a t ic a lly
t im e r o f f o n s le e p o p e r a tio n ,
b a c k t o f o r m e r s e t p o in t
时 间
T e m p .
H e a t in g M o d e
s e t t e m p . d e c r e a s e
a u t o m a t ic a lly
t im e r o f f o n s le e p
o p e r a t io n , b a c k t o
f o r m e r s e t p o in t
s e t t e m p .
- 1 ℃
- 2 ℃
- 3 ℃
+ 2 ℃
+ 1 ℃
s e t t e m p .
1 h 2 h 3 h
5 h
4 h
6 h 7 h 8 h
8 h
7 h
6 h
5 h
4 h
3 h
2 h
1 h
0 . 5 h
