Sartorius TS 12, Инструкция по установке и эксплуатации

Страница: 16 / 40

16
Changing the Target Weight
The target weight depends on the menu code setting in
the scale operating program.
You can enter the target weight either by storing the
weight of a sample on the platform or by numeric entry.
The following menu codes can be set in the scale operat-
ing program:
Code
1 1 1
Only target weight by loading sample; retain
same setting for over/under tolerance limits
1 1 2 Target weight by loading sample;
over/under limits by loading underweight and
overweight samples
1 1 3 Target weight by loading sample; over/under
limits by numeric entries using keys
1 1 4 Not assigned
1 1 5 Only target weight by numeric entry using
keys; retain same setting for over/under
tolerance limits
1 1 6 Target weight by numeric entry using keys;
over/under limits by loading underweight and
overweight samples
1 1 7
Target weight by numeric entry using keys;
over/under limits by numeric entries using keys
At the factory, we have set
code 1 1 3 .
lf necessary, you can change this setting. To do so,
please read pages 23 through 29.