Sartorius PMA.Quality PMA7501-Y Скачать руководство пользователя страница 3

Страница: 3 / 38

Contents

General View of the Equipment . . . . . . 2

Intended Use . . . . . . . . . . . . . . . . . . . 3

Warnings and Safety Precautions . . . . 3

Getting Started . . . . . . . . . . . . . . . . . . 6

Operating the Equipment . . . . . . . . . . 8

Applications . . . . . . . . . . . . . . . . . . . . 10

Calibration/Adjustment . . . . . . . . . . . . 13

Menu Settings . . . . . . . . . . . . . . . . . . 14

Troubleshooting . . . . . . . . . . . . . . . . . 19

Care and Maintenance . . . . . . . . . . . . 20

Recycling . . . . . . . . . . . . . . . . . . . . . . 21

Specifications and Interface Ports . . . . 22

Accessories . . . . . . . . . . . . . . . . . . . . . 24

USB Port (PC) . . . . . . . . . . . . . . . . . . . 25

EC Declaration of Conformity . . . . . . . 27

Safety Instructions . . . . . . . . . . . . . . . 34

Intended Use

The PMA7501-Y... (PMA.Quality series)

is a scale designed specifically for use

in paint-mixing applications. The scale

can be operated via the keypad as a

stand-alone device or using application

software (such as a paint-mixing program

from a paint manufacturer) installed on

a connected PC. If you wish to create

your own application software, Sartorius

can supply the required drivers for DOS or

Windows

operating systems.

Note:

– Before installing and operating the

PMA7501-Y... and the YPS04-Y..,

make sure that you read the Warnings

and Safety Precautions carefully.

– The application examples and menu

settings described in these operating

instructions are not possible with the

PMA7501-Y00W device.

Note:

Improper use or handling can result in

property damage and/or personal injury.

Only qualified personnel may install and

operate the equipment. When operating the

equipment in potentially explosive atmos-

pheres (Zones 2 and 22), make sure you

observe the warning and safety information

in its entirety during installation and opera-

tion, as well as while performing mainte-

nance and repair work on the equipment

(e.g.: EN60079-14).

The standards, regulations, occupational

safety requirements and environmental

protection laws valid in your country must

be observed. It is important that all person-

nel using the equipment understand this

warning and safety information, and have

access to the relevant documents at all

times. Furthermore, the warning and safety

information supplied with any electrical

equipment connected, such as peripheral

devices, must be observed as well.

The warnings and safety precautions may

have to be supplemented by the equipment

operator. All operating personnel must be

informed of any additions to these instruc-

tions. Make sure the equipment is accessible

at all times.

General Provisions for Installing

The PMA7501-Y models with power

supply YPS04-Y.. meet the requirements

defined in EC Directive 94/9/EC for

Class II, Category 3D equipment and

can be operated in potentially explosive

atmospheres (Zone 2) in accordance

with the KEMA05ATEX1248X EC type-

examination certificate. Strictly observe

the Safety Precautions in accordance with

the diagram

36457-751-16

(refer to

“Safety Instructions,” page 34).

Furthermore, PMA7501-Y model meets

the EC Directives for electromagnetic

compatibility and electrical safety (please

see the Declaration of Conformity in

these installation instructions).

Warnings and

Safety Precautions

Содержание PMA.Quality PMA7501-Y







































Результаты поиска

Содержание PMA.Quality PMA7501-Y

Отзывы:

Бренды по названию

Популярные бренды

Sartorius PMA.Quality PMA7501-Y, Руководство по установке

Результаты поиска

Содержание PMA.Quality PMA7501-Y

Отзывы:

Бренды по названию

Популярные бренды