Sartorius Factory Series, Руководство по эксплуатации, Страница: 129 / 213

129
Operating the Scale
Statistics
N
Purpose
With this application program, you
can have weight values and
calculated values totalized and
statistically evaluated.
The values determined for the
evaluation are:
– average (mean value)
– standard deviation
– variation coefficient
– sum of all values
– lowest value (minimum)
– highest value (maximum)
– difference between the minimum
and the maximum
You can use the statistics application
in combination with any program
chosen from Application 1 (such as
counting, weighing in percent) and
one from Application 2
(checkweighing, time-controlled
functions) as well as with the extra
functions.
Features
– Storage of weight values and
calculated values
– Simultaneous storage of net and
calculated values
– Optional configuration in the Setup
menu for loading weight values
and calculated values either from
Application 1 (such as counting,
weighing in percent) or from Appli-
cation 2 (checkweighing, time-con-
trolled functions)
– Totalizing memory for up to
65,535 values
– Simultaneous display in the text
line of the transaction counter and,
e.g., the current total
– Optional configuration in the Setup
menu for having the scale tare
automatically after a value has
been stored in the totalizing
memory
– Manual input of the number of indi-
vidual weighing operations and
confirmation using the
nDef
soft key (target no. of operations
nDef). Result printed and memory
cleared after printout of nDef.
– Optional configuration in the Setup
menu to add the current weight,
with display accuracy, to the
current total by pressing the
M+
soft key and generate a printout
of the result
– Optional configuration in the
Setup menu for stability-dependent
storage of the measured value:
Balance/scale functions, Stability
range
– Optional automatic storage of
measured values
Storage of measured value is
indicated by
Uu
;
zz
indicates that you can place
a load on the scale.
– Minimum load threshold for
automatic storage
– Press the
M-
soft key to delete the
last value added to the totalizing
memory. The transaction counter
value is reduced by one and a
printout is generated.
– Press the
MR
: soft key for
information about number of
transactions and the current total.
By configuring the Setup menu,
you can define whether the
information is displayed and
printed, or only printed, and
whether the information comprises
an intermediate or final evaluation
– In the Info window you can use the
q
,
l
(
o
) soft keys to choose
which value will be displayed in
the text line during weighing
– Printout of the final result
depending on the Application 1
or Application 2 parameters. Con-
figure the Setup menu to define
which values are included on the
printout (printout of individual com-
ponents)
– Press
MR
for a printout of an
intermediate evaluation after each
addition or a final evaluation
– A final evaluation is printed when
the statistics routine is ended
by pressing
c , if no final
evaluation was generated by
pressing
MR
– Optional configuration in the
Setup menu to clear the totalizing
memory and reset the transaction
counter by pressing
c or after an
evaluation is printed out
– Totalization data and transaction
counter data is stored in the non-
volatile memory
– Continue totalization after turning
the scale off and back on