The Sterisart
®
Universal pump
16419 (see Fig. 1) consists of pump
housing (1) with pump head (2),
lever (3), bow (4) and handles (5).
On the right handle, there is also
a bolt with a tilting lock for the
container for draining (11). The
selecting knob (6) is at the front on
the right. The stand (7) with the
holding ring for bottles (8) and
fastening arm (9) and the optional
ampoule breaker (10) is located
on the left side of the pump.
The container for draining (Fig. 1;
11) for the sterility test containers
is located on the right side of the
pump. The drain tubing can be
attached to the appropriate con-
nector (barb) on the container for
draining (Fig. 1; 12).
Located on the rear panel (see
Figure 2) is the On | Off switch (1),
AC power socket (2), socket for
the foot switch (3) and the manu-
facturer’s ID label (8). Sockets (4),
(5), (6) and (7) are not active in the
Sterisart
®
basic model 16419.
Fig. 1
Fig. 2
4
4.
Description of the Sterisart
®
Universal Pump
1 2 5 7 6 3 4 8