Sartorius Stedim Biotech MD8 airscan, Руководство по эксплуатации, Страница: 48 / 57

Before first use, clean all parts with hot water, adding a little gentle laboratory detergent if
necessary, then rinse with hot water followed by distilled water. Dry the parts with hot air and
assemble the filter holder.
To assemble the stack, place the holders in numerical order and insert the top of the first
holder in the intermediate adapter that accepts holders on either side (Fig. 24). Fit the top of
the second holder in the bottom of the first holder (snap them together). Continue by fitting
the third holder on the second one, etc. Fit an end cap on the bottom of the last holder (Fig.
25) and the other end cap on the open side of the intermediate adapter.
Fig. 24
48 |