Sartorius Stedim Biotech MD8 airscan, Руководство по эксплуатации, Страница: 24 / 57

NOTE!
When “cellulose 0.8 μm” is selected, the air flow rate is limited to 6 m
3
/h.
If you have selected an air flow rate setting higher than 6 m
3
/h and then enter the filter class
parameter “cellulose 0.8 μm”, the air flow rate will automatically be reset to 6 m
3
/h.
Other filter types than those listed can be used, but you must then check the regulatory
behaviour and the air throughput of the MD8 airscan by tests/recalibration.
When a displayed parameter is changed with the ⇑ or ⇓ key, the new setting flashes to show
it has not been stored. If you wish to store the change, make sure to press Enter . If you exit
the parameter input menu, either by pressing the Stop or Parameter key, without first
pressing the Enter key, all changes will be ignored.
If you exit a menu item by pressing Stop , the current function (parameter display or input,
service menu or calibration) will be aborted, and the instrument returns to the initial
starting mode.
You can return to the initial starting position at any time by pressing Stop .
24 |