11/30/17
1-800-810-WIRE • www.sargentlock.com • A7861C 15
Copyright © 2017, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
Profile Series v.G1.5 Mortise Dorm Lock
Installation for the RF Technology Lock for G1-TU, G1-TA, G1-TP is, for the most part, installed as
described in Section 6.
In addition:
The antenna board must be carefully moved to access the upper through-bolt screw.
Care should be taken to prevent damage to the antenna retaining tabs during this process (Fig. 7).
1. Press the two tabs away from the antenna board and lift the board off the mounting posts.
2. Insert the flat head through-bolt and secure the escutcheon in place.
3. After tightening the top through-bolt, replace the antenna board by placing it on the mounting posts and
pressing into the retaining tabs.
RF Technology Lock
7
Flathead
Through-bolt
Fig. 7
Antenna
Board
Mounting
Posts
Antenna
Board
Antenna Board
Retaining Tabs
Controller
Assembly
