1 Template
Instructions
<<Delete before
use>>
EC
60
0
EC600 Power Control System
Issue 2.3
Page 5 of 20
10
th
August 2017
Pump Button.
With the power on, press the pump button to turn the water pump on.
Press the button again to turn the pump off. The adjacent LED will illuminate when the
pump is on and the level of the water tank will be shown on the screen.
Interior Lights Button.
With the power on, press the lights button to turn the main
lighting supply on or off.
Light Dimming Button.
With the power on, press the dimmer button to turn the dimmed
lighting on or off. Press the select button to adjust the dimmer level (the menu
automatically changes to the adjustment screen). The last setting is remembered.
Awning Light Button
. With the power on, press the awning light button to turn the
awning light on or off. The Adjacent LED will illuminate when the awning light is on. The
awning light may also be controlled by the caravan alarm system or the motorhome
locking system.
Note, display illumination
. The LCD back light will illuminate for the pre-set time (default time is 30
seconds) adjustable between 5 and 120 seconds. Setting the timer to 0 seconds will force the
backlight to be permanently on. The illumination of the blue LED’s adjacent to the power, pump &
awning light buttons can be configured in the same way as the backlight. The screen will wake up if
your hand is placed near the panel or if a button is pressed.
2.6 Operation while driving
The EC600 system is designed to shutdown parts of the system while the engine is running. This is to
meet Electro Magnetic Compatibility (EMC) regulations and to ensure the safe operation of the
caravan or motorhome.
Please ensure the system shutdown switch on the PSU is in the on (button in) position before driving
(see 2.2). This will ensure the electronic system is active and will therefore be able to control the
charging process, supply the refrigerator and monitor other system circuits.
On motorhomes if / when fitted, designated 12V sockets, en-route reading lights and en-route heating
will remain operational while the engine is running.
With the engine running the screen will show ENGINE RUNNING, the leisure and vehicle battery icons
will be displayed to indicate they are being charged and the charging voltage will be show in the main
display.
