1 Template
Instructions
<<Delete before
use>>
EC
60
0
EC600 Power Control System
Issue 2.3
Page 1 of 20
10
th
August 2017
1 Introduction
This section of the handbook will guide you through the operation of the electrical system. All details
are correct at the time of going to press. Please also see the online version which will include any later
updates or amendments.
Further technical details are contained in section 3 or in the supporting technical manual available from
For the safe operation of all electrical equipment within your Leisure Vehicle it is important that you
read and fully understand these instructions. If you are unsure of any point please contact your dealer
/ distributor for advice before use.
The system has a number of key components that you will need to be familiar with before attempting to
use the system, these are:
·
The EC601, EC602 & EC651 Power Supply Unit (PSU) - a combined mains consumer unit
and 12V controller located in the bed box or upper locker.
·
The EC620 Control Panel (CP) - a remotely located user control panel used to turn circuits
on and off and to display battery, water tank and other system information. This panel uses
simple straightforward controls and reliable data communication to the PSU.
·
The PX300 Intelligent Battery charger 300W.
·
The C44 Road Light Fuse Box - This small unit, which is unique to caravans, is located in
the front bed box. The unit houses fuses for the road lighting circuits and supplies from the
tow vehicle, and also has connectors for the optional alarm system and Automatic Trailer
Control (ATC) unit.
2 Using the System
2.1 Power Supply Unit - Component Layout
The PSU is located in the front offside bed box area in caravans, and in similar locations in
motorhomes.
Heating
System
switch
Charger
switch
Reverse polarity
indicator
Residual Current
Device (RCD)
Miniature Circuit
Breakers (MCB’s)
RCD
Test
button
12 Volt DC fuses
(under flap)
Isolate
switch
