background image

 

 

        EC400 / EC450 series Power Control System 

 

E

C

45

0

 

 

 

 

Issue 1 

Page 2 of 13 

12

th

 June 2011 

2.2  Power Supply Unit – Component Layout 

230V Components 

Red indicator – Reverse polarity indicator, lights up when the 230V supply polarity is reversed. 

Green push switch – Charger switch, this switch turns the 12V battery charger on or off.  “In” is 
on “out” is off. 

Amber push switch – Space heater switch, this switch turns the 230V supply to the space 
heater / combination heater / central heating system on or off.  In is on out is off. 

 

Clear push switch – Water heater switch, this switch turns the 230V supply to the separate 
water heater on or off.  In is on out is off.  
Note, If the vehicle contains a combined space & Water heater then this button is not used. 

Black lever switch, far left – Residual Current protection Device 
(RCD) and main 230V on / off switch. 

Yellow button, far left – RCD test button. 

 

Red lever switches, right – 3 x 10A Miniature Circuit Breakers 
(MCB).  Please note that installations with a 3KW Alde heating 
system will have 2 x 10A and 1x16A MCB’s. 

 

12V Components 

Black push switch, far left – System shutdown switch, this 
switch turns the power control system on or off.  In is on 
out is off.  
Yellow push button, top right – Select button, this button is 
used to scroll through the display items on the LCD screen. 

 

Red push button, bottom right – Set button, this button is 
used to change the setting of the displayed item on the 
LCD screen. 

 

12V DC circuit protection fuses.  Fuse number 1 is top left; fuse 
number 14 is bottom, right.  See section 3.5 for full fuse allocation 
details. 

2.3  Activating the System 

The EC400 / EC450 system has a shutdown feature that should be used when the vehicle is in storage 
or is not being used for long periods of time.  This allows the leisure electronics to be turned off when 
not required to save battery power.  When in the off state the alarm and tracking system supplies are 
still active, most other supplies are turned off. 

Before using the system please ensure the shutdown switch is in the system on position (button in). 

Содержание EC400 Series














Отзывы: