!"
PC-I7RD400 User’s Manual
Hard Disk Boot Priority
Navigate to this section and press <Enter> to view the following screen:
Phoenix - Award WorkstationBIOS CMOS Setup Utility
Hard Disk Boot Priority
1. Ch0 M.
:
ST380021A
Item Help
2. Bootable Add-in Cards
Menu Level
TT
Use <
> or <
> to
select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.
\[
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values
F6:Fail-Safe Defaults F7: Optimized Defaults
Virus Warning (Disabled)
If this function is enabled and someone attempts to write data into this area,
BIOS will show a warning message on screen and an alarm will beep.
CPU L1&L2 Cache (Enabled)
All processors that can be installed in this motherboard use L1&L2 cache
memory to improve performance. Leave this item at the default value for better
performance.
Quick Power On Self Test (Enabled)
To allow the system to skip certain tests while booting. This will decrease the
time needed to boot the system. You might like to enable this option when you
are confident that your system hardware is operating smoothly.
Third Boot Device (LS120)
Use these three options to select the priority and order of the devices that your
system searches for an operating system at start-up time.
Boot Other Device (Enabled)
When this option enabled, the system searches all other possible locations
for an operating system if it fails to find one in the devices specified among the
First, Second, and Third boot devices.
Boot Up Floppy Seek (Enabled)
When this option is enabled, it checks the size of the floppy disk drives at
start-up time.
