!!
SAPPHIRE PURE CROSSFIRE II
Access Mode (Auto)
This option defines ways that can be used to access IDE hard disks such as
LBA (Large Block Addressing). Leave this value at Auto and the system will
automatically decide the fastest way to access the hard disk drive.
Press <Esc> to return to the Standard CMOS Features Page
Drive A (1.44M, 3.5 in./None)
This option defines the characteristics of any diskette drive attached to the
system. You can connect one or two diskette drives.
Halt On (All Errors)
This option defines the operation of the system POST (Power On Self Test)
routine. You can use this item to select which types of errors in the POST are
sufficient for you to halt the system.
Base Memory, Extended Memory, and Total Memory
These options are automatically detected by the system at startup. They are
display-only fields. You cannot make changes to these fields.
Advanced BIOS Features
This section defines advanced information about your system.
Phoenix - Award WorkstationBIOS CMOS Setup Utility
Advanced BIOS Features
T
CPU Feature
[Press Enter]
T
Hard Disk Boot Priority
[Press Enter]
Virus Warning
[Disabled]
CPU L1 & L2 Cache
[Enabled]
Hyper-Treading Technology
[Enabled]
Quick Power On Self Test
[Enabled]
First Boot Device
[Floppy]
Second Boot Device
[Hard Disk]
Third Boot Device
[LS120]
Boot Other Device
[Enabled]
Boot Up Floppy Seek
[Enabled]
Boot Up NumLock Status
[On]
Gate A20 Option
[Fast]
Typematic Rate Setting
[Disabled]
x Typematic Rate (Chars/Sec)
6
x Typematic Delay (Msec)
250
Security Option
[Setup]
APIC Mode
[Enabled]
MPS Version Control For OS
[1.4]
\[
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values
F6:Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
T
