-
4
-
2
5
Installing
System
Memory
This mainboard has two 240-pin DIMM slots for DDR3 memory. These slots support
1GB, 2GB and 4GB DDR3 DIMMs.
Make sure that you install memory modules of the same type and density in the
correct DIMM sockets for Dual-Channel mode.
There must be at least one memory bank populated to ensure normal operation and
always insert the memory module into DIMM slot 1 first.
Memory Configuration:
Bank
240-Pin DIMM
PCS Total Memory
Bank 0, 1 (DDRIII 1)
DDRIII 800/DDRIII 1066/DDRIII 1333
X1
4GB
Bank 2, 3 (DDRIII 2)
DDRIII 800/DDRIII 1066/DDRIII 1333
X1
4GB
Total Memory
(Max.4GB)
2
8GB
DIMM
2
(BA
NK2
+
BAN
K3
)
DIMM
1
(BA
NK0
+
BAN
K1
)
Dual Channel
Supported
Memory Installation:
DDR3 and DDR2 memory modules are physically different. Please only install DDR3
DIMMs in this mainboard.
To install the DIMM, follow these steps:
1.
Pull both clips on either side of the slot outwards. Align the DIMM module with the
slot ensuring that the notch in the DIMM lines up with the protrusion in the slot.
2.
Press straight down until the plastic clips close and the module fits tightly into the
DIMM slot.
