Sapphire Audio PI-AM3RS760G2 Скачать руководство пользователя страница 2

 

ii

                                                                                         

 

Federal Communications Commission (FCC) Statement 

This device has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with instructions contained in this manual, may cause harmful interference to 
radio and television communications. However, there is no guarantee that interference will 
not occur in a particular installation. 
If this product does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures: 

y

 

Reorient or relocate the receiving antenna. 

y

 

Increase the separation between the equipment and receiver. 

y

 

Connect the product into an outlet on a circuit different from that to which the receiver 

is connected. 

y

 

Consult the dealer or an experienced radio/TV technician for help. 

Í

 

Note1: Connecting this device to peripheral devices that do not comply with Class B requirements, or 

using an unshielded peripheral data cable, could also result in harmful interference to radio or 
television reception 

Note2:  The user is cautioned that any changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate this product. 

Note3:  To ensure that the use of this product does not contribute to interference, it is necessary to use 

shielded I/O cables 

 

CE: Radiation of EN 55022 & Immunity of EN 55024 

 

Waste Electrical and Electronic Equipment (WEEE) Statement 

To protect the global environment, this product must be sent to separate collection 
facilities for recovery and recycling. 
 

DISPOSAL

 

Do not dispose of this product as unsorted municipal waste. Collect such waste 
separately for special treatment. 

Содержание PI-AM3RS760G2






























Отзывы: