-
22
-
CPU/HT Reference Clock
Use this item to set CPU/HT Reference Clock. The optional setting range is: 190~400
MHz.
PCI E Reference Clock
Allows you to select PCIE reference clock. The enabled setting is 100.
SB Reference Clock
Allows you to select SB reference clock. The enabled setting is 100.
Processor Voltage
Allows you to select processor voltage. The optional settings are: Auto,
0.800V~1.350V.
AOD Compatibility
Choose Enabled means only AMD over drive can adjust voltage Choose Disabled
means only BIOS can adjust voltage
Memory Clock Mode
Allows you to select memory clock mode. The optional settings are: Auto; Limit and
Manual.
3
12
Password
Setting
The menu allows you to change the system security settings.
Change Supervisor Password
This item is used to set or change supervisor password.
¾
To set a Supervisor Password:
1.
In the password box, key in a password number, then press <Enter>.
2.
Confirm the password when prompted.
3.
The message “Password Installed” appears after you successfully set your
password.
Password
Settings
Help
Item
Enable/Disable
Boot
Sector
Virus
Protection.
:
Move
Enter:
Select
+/
‐
/
:
Value
F10:
Save
ESC:
Exit
F1:
General
Help
F5:
Previous
Values
F6:
Fail
‐
Safe
Default
F7:
Optimized
Defaults
Security
settings
Supervisor
Password
:
Not
Installed
User
Password
:
Not
Installed
Change
Supervisor
Password
Press
Enter
Change
User
Password
Press
Enter
Boot
Sector
Virus
Protection
Disabled
CMOS
Setup
Utility
– Copyright
(C)
1985
‐
2005,
American
Megatrends,
Inc.
