~ 14 ~
2-pin 12V~24V Power Connector
PW_CON, This power connector is used to provide power to the system. Align
the power plug to the connector and press firmly until seated.
SATA3 Connector
The S1 and S2 are SATA3 Connectors and works at speeds of up to 6G/s. Each
cable can be used to connect one SATA drive to the mainboard.
SATA Power Header
The SATA Power header is used to provide 5V and 12V power to SATA3
HDD(SSD).
Pin
Definition
1
+12V~+24V
2
GND
Pin
Definition
1
GND
2
TX+
3
TX-
4
GND
5
RX-
6
RX+
7
GND
Pin
Definition
1
+12V
2
GND
3
GND
4
+5V
Note:
There are two ways to source power to the board: DC jack or
2-pin power connector. Two different physical ports that can
only be used one at a time.
e.g. When DC-in 12V ~ 24V jack is being used, the 2-pin power
connector shouldn’t be connected to any power source.
DC-in Jack
Warning:
One of the power inputs may be damaged when connecting
both DC jack and 2-pin power connector at the same time.
1
4
1
7
S2
S1
1
2
