34
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
+1 215.322.6063 P.
+1 215.322.8498 F.
www.sapling-inc.com
TalkBack Settings - Details Button
q
Clock Name -
This column displays the name of each clock in the system. Users will often assign the actual location of the clock as its clock
name (i.e. Clock Name: Hallway 2nd Floor)
w
Date/hour(hr) -
The date displayed beside each clock tells the user the last day and the last hour of that day that each clock communicated
with the master clock.
e
Error Count (Err Cnt) -
This number shows the user the accuracy of the second, minute, and hour hand of each clock. Please see figure 4 on
page 42 for more details.
r
RX Quality -
This column shows the signal quality for each clock. Refer to figure 2 on page 42 for details.
t
Tier Number -
This column shows the user where in the system a particular clock is located. The tiers are separated by their distance from
the master clock (i.e. tier #0 being the closest, tier #10 being the farthest)
y
Battery Voltage -
This column is used to show the user the battery level of each clock, 3.00 volts meaning the clock is operating on a full
battery. Refer to figure 1 on page 42 for details.
u
Mechanical Status -
This column shows any mechanical failure that a clock may experience. Please see figure 3 on page 42 for more details.
i
Software (SW) Version -
This number indicates the software that each clock is currently using.
o
Hardware (HW) Version -
This number indicates the hardware that each clock is currently using.
a
Communication Count -
This field tells the user how many times the clock has communicated since it was paired with the master clock. If
a communication count of one particular clock is less than the count of other clocks, then that clock has missed communication and must be
checked.
s
Next -
This button is used to switch to the next page of clocks (if the user has more than one page of clocks).
Web Interface Programming
s
a
o
i
u
y
t
r
e
w
q
