10
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Method 2
Static IP:
1) POWER DOWN AND UNPLUG the repeater.
2) Use a screwdriver to unlock the top panel.
3) Lift the top panel away from the repeater casing.
4) Identify the circuit board in the diagrams on the right.
5) Locate the black jumpers on the board. Move the
jumper from Position A to Position B.
6) Attach the repeater to the network. On a computer
attached to the network, the repeater should be accessible
by typing IP address
192.168.0.123
into a web browser.
7) Log in to the clock by entering the password
6063
into
the password field, then pressing the Log In button.
8) On the Network Settings Tab, set DHCP to OFF.
9) Set the following values:
Gateway IP Address, Subnet Mask,
DNS Router,
and
IP Address.
If you need help with these values,
ask your Network Administrator for assistance. Record the new IP
address in your records.
10) Press the Submit button, log out of the network repeater, and
power down the device.
11) Move the jumper from Position B back to Position A, then use the
screwdriver to reattach the front panel.
12) Power the device. Attempt to use the new IP address in a web
browser to reach the repeater’s web interface.
If you successfully reach the web interface, then the repeater’s network settings have been properly
configured. If you do not reach the web interface, reattempt the setup, starting from the beginning.
Connecting to the Repeater (ctd.)
2
3
Position A
Position B
