The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
+1 215.322.6063 P.
+1 215.322.8498 F.
www.sapling-inc.com
9
Web Interface
Network Settings
q
Gateway IP Address -
This field allows for the Gateway IP address to be set.
w
Subnet Mask -
This field allows the Subnet Mask to be set.
e
DNS Router -
This field allows for the DNS router address to be set.
r
IP Address
- This field will display the IP address that was given by the DHCP server. If DHCP is disabled, then the user will be able to
set the repeater’s IP address.
t
MAC Address
- This read only option is the repeater’s physical address.
y
DHCP
- This setting allows the user to choose whether the repeater uses DHCP server or not.
u
Broadcast to Monitors
-This setting allows the repeater to send out its data in broadcast mode.
i
Send Specific Monitor IP
- This setting allows the user to send the repeater’s status to a computer on a sub-net outside of the
normal network.
o
Monitor IP Address
- This is where the user will type in the IP address of the specific sub-network in which the repeater’s status will
be sent outside of the normal network if option 8 in enabled.
a
Ethernet Speed*
- Allows the user to either manually set the Ethernet speed at 10MBit, 100MBit, or allows the repeater to Auto
Negotiate the speed with the Network Router/Switch
s
Connection Mode*
- Allows the user to either manually set the connection mode to Full Duplex, Half Duplex, or allows the repeater to
Auto Negotiate the speed with the Network Router/Switch.
d
Submit
- This button, when pressed, saves all of the settings that were changed.
*”Auto Negotiate” is the recommended setting for this feature.
q
w
e
r
t
y
u
i
o
a
s
d
