_
English
_
•
Be careful to avoid being scalded by spraying water or steam or due to the improper use of
the appliance.
•
When using the appliance do not touch the hot surfaces. Use the buttons or handles.
•
After having removed the packaging, check that the appliance is free of damage. If in
doubt, do not use the appliance and contact the authorized service center.
•
Keep the packaging materials (plastic bags, polystyrene foam, etc.) out the reach of
children, as they are potential sources of danger.
•
The appliance must work only connected to a power outlet; never use it directly on
flames!
•
Never touch the appliance with wet or damp hands or feet.
•
In the event of faults or malfunctioning of the appliance, switch it off and do not tamper
with it.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
•
Fill the boiler with water before placing the coffee maker on the support base.
•
Do not let the power cable come into contact with the metallic parts of the coffee maker
when in operation.
INSTALLATION
•
Place the appliance on a stable, flat and heat resistant surface away from water taps and
sinks.
•
Check that the voltage of the mains power supply corresponds to the value indicated on
the appliance rating plate. Only connect the appliance to a power outlet with a minimum
rating of 6A that is properly earthed. The manufacturer declines all liability for any
accidents caused if the system is not correctly earthed.
•
If the power outlet does not match the plug on the appliance, have the outlet replaced with
a suitable type by qualified personnel.
IMPORTANT:
During the first time the coffee maker is used, all the accessories and the
internal circuits should be washed with hot water. Then make a few batches of coffee to throw
away.
