_
English
_
selector to your desired setting. You can press down the pulse button without releasing it
if you want to accelerate the process of blending. The detailed information is shown in
below.
NOTE: Make sure the jar cover is placed in position completely before operating,
and never open the jar cover during operation. In addition, for the sake of
consistency, you can use the stir stick to stir mixture through the opening in the
center of the measuring cup.
6.
Do not run the appliance for more than 3 minutes per time, and only wait until the unit is
cooled to room temperature before performing next operation cycle.
7.
Turn the speed selector to “ 0” position once the mixture has been blended to your desired
consistency.
8.
Turn the jar anti-clockwise and remove it from the motor unit, carefully take down the jar
cover, then pour and serve.
WARNING
1.
Never operate the appliance continuously for more than 3 minutes per time.
2.
Blades are very sharp. Handle with care.
3.
Do not operate without the jar cover in place.
4.
Do not disassemble the jar or bowl from the jar base or bowl base in general condition.
CLEANING AND MAINTENANCE
Make sure to disconnect appliance from power supply before cleaning.
For blender
The Auto Clean function can clean the blender easily and rapidly in complete safety.
1.
Pour a little warm soapy water into the jar and turn the speed selector to “1” position and
press down the pulse button without releasing it for a few seconds.
2.
Dismantle all detachable parts. Disassemble the jar from the motor unit and rinse it under
running water, then detach the blade assembly from the jar assembly, take the blade
assembly out, finally remove the jar base seal ring (see the figure below). In addition,
detach the measure cup from the jar cover. Rinse the jar, blade, jar base, jar cover and
measuring cup under running water.
