_
English
_
KNOW YOUR BLENDER
1.
Jar cover
2.
Jar
3.
Jar base seal ring
4.
Blade assembly
5.
Jar base
6.
Body
7.
Control panel
8.
Knob
9.
Base
BEFORE USING FOR THE FIRST TIME
Check that all parts are complete and not damaged. Choose the appropriate attachment to
perform your desired task. The blender attachment is suitable for blending fruits or vegetables
or crushing ice, while the grinder attachment for grinding coffee beans. Clean the attachment
according to the section “CLEANING AND MAINTENANCE”.
WARNING: The blade is sharp, handle with great care and ensure that the appliance is
unplugged from outlet before assembling and removing parts.
BLENDER OPERATION
1.
Lay the motor unit on the flat horizontal surface and make sure it is unplugged.
NOTE: There is a safety interlock device at the bottom of jar, if the jar is not
assembled in place, the blender will not operate.
2.
Open the jar cover by turning anti-clockwise and place it on the surface. Peel or core the
fruits or vegetables and then cut it into small pieces, then put them into the jar. Usually
certain amount of purified water has to be added to facilitate the smooth running of
appliance. The amount of mixture should not exceed the max level as indicated on the jar,
nor sit lower the min level. The best proportion of the fruits or vegetables and water is 2:3.
NOTE: The blender is not applicable for beating egg white, mashing potatoes,
mixing dough, extracting juice from fruit and vegetable.
3.
Replace jar cover on the jar and turn it clockwise.
NOTE: There is a safety interlock device at the side of jar cover, if the jar cover is
not assembled in place, the blender will not operate.
4.
You may add ingredients into the jar through the center opening of jar cover during
operation, then replace measuring cup if necessary. Let the tabs of measuring cup aligns
with the grooves of jar cover, put down and turn the measuring cup by clockwise until it
in place.
5.
Ensure the speed selector to “0” position, then plug into power outlet and set speed
