_
English
_
BEFORE FIRST USE
Remove any packaging material or promotional labels before first use. Wash the chopper cover and bowl in
warm, soapy water. Dry thoroughly.
Care should be taken when cleaning the blades, blades are sharp!
PARTS AND FEATURES
A.
ON/OFF pulse button with two speeds
B.
Main body with motor
C.
Cover
D.
Blade
E.
500ml bowl
Power Head
The power head operates on 220V / 50 Hz electrical power. Never allow the
power head to become wet when plugged into an electrical outlet.
WARNING
:
The power head should never be immersed in water or any other liquid.
CAUTION:
Make sure that the power head is unplugged from the electrical
outlet and that the blades have stopped turning before attaching or removing
any accessory.
USING THE CHOPPER
CAUTION:
Blades are sharp!
Use extreme caution when handling the blades. Always hold them by the hub.
1.
Place the bowl on a clean, dry, level surface.
2.
Holding the blade by the shaft place it onto the spindle pin inside the bowl.
3.
Add the ingredients to be processed into the master prep pitcher.
4.
Place the cover onto the top of the bowl.
5.
Place the power head on top of the cover making sure that it is securely in place. Do not attempt to
operate the appliance without the cover in place.
6.
To start the appliance, press and hold the ON/OFF pulse button located on the top of the power head.
To stop the appliance, remove your fingers from the ON/OFF pulse button. In order to obtain a better
quality of the processed food, operate the appliance by using the “Pulse” method. If the ingredients
stick to the side of the cover, stop the appliance, remove the power head and the cover. Use a spatula
to dislodge the pieces and then replace the cover and the power head. Continue processing.
7.
Hold the cover firmly while depressing the ON/OFF pulse button to ensure the unit stays in place.
8.
Make sure that the blades have stopped completely before removing the cover.
9.
Remove the blade assembly by its shaft before you empty the contents of the bowl.
10.
Never add ingredients into the bowl before placing the blade assembly in first.
NOTE: Do not operate the appliance continuously for more than 15 seconds at a time.