Sapido RB-1602 страница 5 Скачать руководство пользователя

Страница: 5 / 167

http://www.sapido.com.tw/ User Manual 1.0

Copyright Statement

The products, including accessories and software are the property of SAPIDO Technology Inc.

It is prohibited to reproduced, transcribed, transmitted and stored without authorization from

SAPIDO. SAPIDO may update, revise, and change the contents of this manual without

further notice. Users can visit the official website for reference. After reviewing this manual, if

you have any problem or suggestion. You are welcome to contact us. Our Technical Support

Engineer will reply related problem as soon as possible.

All trademarks and trade names are the properties of their respective owners.

Warranty

One-Year Warranty is provided for consumer products. This warranty is subject to the

conditions and limitations set forth herein. ("We") warrants and tests the Product to be free

from defects in material and workmanship and to conform to published specifications. During

the warranty period, should the Product fail under normal use in the recommended

environment due to improper workmanship or materials, we will repair the Product or replace

it with a comparable one. This warranty is for a specific period of time from the date of

purchase. Proof of date of purchase is required. We will inspect the Product and make the

decision regarding repair or replacement. We reserve the right to provide a functionally

equivalent refurbished replacement Product.

This warranty does not apply to Product failure due to

：

1. accident, abuse, and mishandling

2. any software against product manual

3. improper installation

4. any unfitted replacement

5. over allowable environment

6. alteration

7. improper usage

8. wires or parts oxidized

Содержание RB-1602








































































































































































Результаты поиска

Содержание RB-1602

Отзывы:

Похожие инструкции для RB-1602

Бренды по названию

Популярные бренды

Sapido RB-1602, Руководство пользователя

Результаты поиска

Содержание RB-1602

Отзывы:

Похожие инструкции для RB-1602

Бренды по названию

Популярные бренды