Sapido RB-1602 страница 29 Скачать руководство пользователя

Страница: 29 / 167

http://www.sapido.com.tw/ User Manual 1.0

The default values for User Name and Password are admin (all in lowercase letters). Click

Login to enter.

4.2

AP Mode

Under AP Mode, the SAPIDO Light N+ Broadband Router supports 2 LAN ports as Bridge,

and user can connect to this Router via LAN port and provide the lower level wired or wireless

internet connections. NAT function is disabled under AP mode. The SAPIDO Light N+

Broadband Router connects the upper level device only through the Ethernet port and gets its

assigned IP address. If not, the SAPIDO Light N+ Broadband Router will use the default IP or

assigned by the user.

4.2.1

Switch to AP Mode

Switch to AP mode and plug in power.

Note: 1. Before sliding the switch modes, please power-off the router firstly. Moreover, please stay over 5 seconds

between power-off / power-on condition.

2. Switching the mode while power is on will make the router crush, and cause the hardware damage and
information lost.

Содержание RB-1602








































































































































































Результаты поиска

Содержание RB-1602

Отзывы:

Похожие инструкции для RB-1602

Бренды по названию

Популярные бренды

Sapido RB-1602, Руководство пользователя

Результаты поиска

Содержание RB-1602

Отзывы:

Похожие инструкции для RB-1602

Бренды по названию

Популярные бренды