background image

4

REMOTE CONTROL UNIT

Display

Information on the operating conditions is displayed while the remote control 
unit is switched on. If the unit is turned off, only the mode that was set 
previously is still displayed.

FAN SPEED selector button

: The air conditioner automatically decides the fan speeds.

: High fan speed

: Medium fan speed

: Low fan speed

FLAP button

Press this button either to select the setting of the airflow direction to one of 
the six possible positions manually or to select the sweep function which 
moves the flap up and down automatically.

: The airflow direction can be set manually. (six positions)

: The flap moves up and down automatically.

When you press the FLAP button, the air flow direction will be changed one by 
one as follows.

NOTE

SWEEP

Temperature setting buttons (TEMP.)

Press the 

 button to increase the set temperature.

Press the 

 button to reduce the set temperature.

The temperature setting changes by 2 °F each time one of the TEMP. buttons 
is pressed.

NIGHT SETBACK button

For details, see “5. Night Setback Mode”. When you press this button in the 
HEAT, DRY or COOL mode, the 

 mark appears in the display, and the 

remote control unit will automatically adjust the set temperature to save 
energy.

Timer and Present Time setting buttons

First, press the SET button to select the mode (ON, OFF and Present Time 
settings) you want.
Each time you press the ‘‘HH’’ button, the hours advance by one.
(PM0, PM1.....PM11, AM0, AM1.....AM11)
Each time you press the ‘‘MM’’ button, the minutes advance by one when 
setting Present Time and by ten when setting ON and OFF Time.

SET button

For details, see ‘‘Setting the Timer’’.
Press this button to select the mode you want to program.

ACL button (ALL CLEAR)

When you press the ACL button while the 
operation button is ON, all settings are cleared. 
Press the ACL button if the air conditioner is not 
operating correctly.

The descriptions on the AUTO (

) or HEAT (

) operation mode are only for the “COOL/DRY/HEAT Model,” and not for the 

“COOL/DRY Model.”

NOTE

OI-119-4-EG

01_STK-RCS-7TWSU_EN.fm  Page 4  Tuesday, October 14, 2008  1:48 PM

Содержание XS1271























Отзывы: